CANFIS based DSTATCOM modelling for solving power quality problems

Keywords: ANFIS, CANFIS, DSTATCOM, Power quality, Smart grid

Abstract

Devolution of the power grid into smart grid was necessitated by the proliferation of sensitive load profiles into the system, as well as incessant environmental challenges. These two factors culminated into aggravated disturbances that cause serious havoc along the entire system structure. The traditional proportional-plus-integral-plus-derivative (PID) solution offered by the distribution synchronous compensator (DSTATCOM) could no longer hold. As such, this paper proposes some soft-computing framework for redesigning DSTATCOM to automatically deal with power quality (PQ) problems in smart distribution grids. A recipe of artificial neural network (ANN) and coactive neuro-fuzzy inference systems (CANFIS) was fabricated for the objective. The system was modelled, simulated, and validated in MATLAB/Simulink SimPowerSystems environment. The performance of the CANFIS against adaptive neuro-fuzzy inference systems (ANFIS), ANN and fuzzy logic controllers’ algorithms proved superior in handling PQ issues like voltage sag, voltage swell and harmonics.

Downloads

Download data is not yet available.

References

J. Stoustrup, A. Annaswamy, A. Chakrabortty, and Z. Qu, (Eds.), “Smart grid control: overview and research opportunities,” Switzerland: Springer Cham, 2019; doi: 10.1007/978-3-319-98310-3

J-S. R. Jang, C-T. Sun, and E. Mizutani, “Neuro-fuzzy and soft computing: A computational approach to learning and machine intelligence,” NJ: Practice Hill, 2007.

B. B. Bukata, “Evolutionary optimisation for volt-var power quality control,” Ph.D. Thesis, University of Glasgow, 2012.

IEEE recommended practices and requirements for harmonic control in electric power systems, 1993.

Chapman. Power quality and utilisation guide section 5 - introduction, November 2001 http://www.copperinfo.co.uk/powerquality/downloads/pqug/51-voltage-dips.pdf

M. Paul, and P. R. Kasar, “Voltage sag mitigation by D-STATCOM using voltage regulation technique,” Int. Journal of Engineering Research & Technology, vol. 3 no. 5, pp. 96-101, 2014.

B. B. Bukata and R. A. Gezawa, “Design of an efficient ANFIS based UPQC harmonics control in electrical power system,” Proceedings of 2nd Int. Conference on Green Engineering for Sustainable Development, Bayero University Kano, Nigeria, 2017, pp. 65 – 71.

E. Mizutani, J-S. R. Jang, K. Nishio, H. Takagi and D. M. Anslander, "Coactive neuro-fuzzy modelling for colour recipe prediction," Proceedings of ICNN'95 – Int. Conference on Neural Networks, Perth, WA, Australia, 1995, pp. 2252-2257.

E. Mizutani and J-S. R. Jang, “Coactive neuro-fuzzy modelling,” Proceedings of Int. Conference on Neural Networks, Perth, WA, Australia, November 27 - December 1, 1995, pp. 760 – 765.

W. Freitas, E. Asada, A. Morelato, and Wilsun Xu, "Dynamic improvement of induction generators connected to distribution systems using a DSTATCOM," Proceedings of Int. Conference on Power System Technology, Kunming, China, 2002, pp. 173-177.

N. G. Hingorani and L. Gyugyi, “Understanding FACTS: Concepts and technology of flexible ac transmission systems”, NY: Wiley-IEEE Press, 1999.

T. Tagaki and M. Sugeno, “Fuzzy identification of systems and its application to modelling and control,” IEEE Transactions on Systems, Man, and Cybernetics, vol. SMC-15, no. 1, pp. 116 – 132, 1985.

Published
2021-04-27
How to Cite
Bukata, B. B., & Gezawa, R. A. (2021). CANFIS based DSTATCOM modelling for solving power quality problems . Journal of Advances in Science and Engineering, 4(2), 75–85. https://doi.org/10.37121/jase.v4i2.148
Section
Research Articles