Development of an RFID-based security door system
This paper describes the development of a two-factor radio frequency identification (RFID)-based security door authentication scheme that can provide efficient control facilities to restrict the entry of an unauthorised door user. The developed system consists of the RFID unit, a microcontroller programmed to control the operation of the door using a synchronous motor. The multiplexers that comprise integrated circuits combined with the liquid crystal display was utilized for displaying the status of the card user while the alarm system informs the public of an intruder. The experimental results are presented and discussed.
T. Ralph, K. Mackenzie, RFID door lock, Senior Project submitted to the Department of Electrical Engineering, California Polytechnic/State University San Luis Obispo, pp. 20-37, 2014.
H. Markus, “Identification and tracking of individuals and social networks using the electronic product code on RFID tags,” IFIP Summers Ltd, Sweden, 2000.
M. S. Okundamiya, Design and implementation of a GSM activated automobile demobilizer with intruder identification capability, M.Eng. Thesis, University of Benin, Benin City, Nigeria, 2007.
M. S. Okundamiya, J. O. Emagbetere, F. O. Edeko, “Design and implementation of a GSM activated automobile demobilizer with identification capability,” Advanced Materials Research, vol. 62-64, pp. 89-98, 2009.
Z. B. I. Mohd, Design and implementation of smart home automation and security system, M.Eng. thesis submitted to the department of Electrical Engineering Universiti Teknikal Malaysia Melaka, 2008.
M. S. Okundamiya, S. Emakpor, “Design and control strategy of a security door system using radio frequency signal,” presented at IEEE NIGERCON 2017, Owerri, 7-10 November, 2017.
S. N. Rahman, S. S. Bashar, A. A. Mahmud, S. Miah, A. H. M. Zadidul Karim, and M. Marium. "A security system for kindergarten school using RFID technology", J Comp. Comm., vol. 7, pp. 21–30, 2019.
R. Abdul, “Home security system for automatic doors capstone design project,” Final Report, School of Engineering, The State University of New Jersey, USA, 2013, pp. 10 – 20.
M. Khaing, “Design and implementation of bank locker security system based on fingerprint sensing circuit and RFID reader,” International J. Scientific & Technol. Res., vol. 4, no. 7, pp. 6-10, 2015.
Smartpower, “Smartpower automation,” www.smartpower.co.in (accessed on April 17, 2019)
Copyright (c) 2020 Sunday Emakpor, Emmanuel Esekhaigbe
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.